Billedgalleri
Rotel Michi RHB-10 RHA-10 & RHR-10AT
Varebeskrivelse
Stand: Som ny - ingen synlige brugsspor
Mærke: Andre mærker
UPDATE:
Jeg vil være helt ærlig og sige at det her har været det sværeste anlæg at træffe beslutning om at ville sælge eller ikke, og derfor har annoncen været på og af flere gange.
Men nu har jeg fundet en erstatning, så jeg vil gerne sælge sættet for det samme jeg har givet for det i vinters.
Det spiller fantastisk. Der er ikke mere at sige end det. Det trækker det hele. Og er det lækreste sæt jeg nogensinde har haft.
Meget sjældent Rotel Michi sæt fra 1991-1996, med manualer, kvitteringer fra service senest i 2023, fjernbetjening samt opgraderede terminaler.
Effekt:
200W 8 ohms pc.
330W 4 ohms pc.
Signal to noise ratio 130 dB.
Står så tæt på nyt som det nærmest kan.
English:
Very rare Rotel Michi set from 1991-1996, with manuals, receipts from service latest in 2023, remote control and upgraded terminals.
In near mint condition.
Michi means "direction" and the RHB-10 was named Kokoro : heart.
Rotel built a lot for many and kept most of its own lineups close to the "budget high-end" throughout its life with only rare attempts at clearly tagged super-toppers like the RB-5000 and RC-5000.
Thirteen years after the 5000s, the Michi series was however launched when japanese high-end was beginning to be superceded by the unexpected return of its american and european... predecessors.
At first with only three components, the Michi series was later complemented in some markets by one variant, two sources and a less expensive sibling :
RHB-10 dual-mono power amplifier
RHC-10 passive controller
RHQ-10 phono equalizer
RHA-10 active preamplifier
RHT-10 FM tuner
RHCD-10 CD player (big)
RHB-05 power amplifier.
The RHB-10 is an enormous dual-mono powerhouse with two 1000W low-leakage toroidal power transformers (yes : 2x 1kW !) working with dual rails : low power is output in Class A, while higher needs switch the circuit to Class B.
Total power output amounts to 2x 200W (8 Ohm, 20Hz...20Khz) with little distortion.
The four big caps you can see below amount to 88,000µF and the rest of the componentry is top of the red pops : 0,01% and 0,1% tolerance Vishay resistors, 6N pure stress-free copper wiring between output stages and WBT speaker terminals, glassfiber PCBs with doubled-up copper tracks and solid copper bus bars.
Also dual-mono regulations all over separately feeding power-supply, output stages, pre-driver stages, protection relays and indicators separately through filter caps and rectifiers.
The first stage of the pre-driver stages is a fully complementary push-pull differential amplifier, followed by two emitter-follower stages.
Thermal and DC drift are dealt with through referenced center-point voltage.
The output stages make music with Darlington quadruple parallel fully complementary push-pull - symmetrical and mirrored "top, bottom, left and right" ; Sanken power devices.
Like the RC-5000 and RB-5000, the Michi series was mostly made for the export market and is just as exceedingly rare.
RHB-10 Power Amp.
Size - W 470 mm, D 375 mm, H 195 mm.
Weight - 28.5 kg.
RHA-10 Stereo Active Controller ( Pre Amp)
Size - W470 mm, D 332 mm, H 76 mm.
Weight 7.7 kg.
Tags:
Rhb 10
Rha 10
Effektforstærker
Forforstærker
Stereoanlæg
Integreret forstærker
Vintage Hi-Fi
Vintage hifi
Brugerprofil
Du skal være logget ind for at se brugerprofiler og sende beskeder.
Log indAnnoncens metadata
Sidst redigeret: 27.5.2025 kl. 19:07 ・ Annonce-ID: 9838598
