Billedgalleri
Forstærker, JBL, ESC 230 surround Processor/ Amp
Varebeskrivelse
Stand: Brugt - men i god stand
Mærke: JBL
Forstærker, JBL, ESC 230 surround Processor/ Amp , 15 W, God, JBL ESC 230 surround forstærker i flot stand.
Forstærkeren kan tilkobles højtalersæt til surround brug, men også bruges som "almindelig" forstærker.
Den kommer fra ikke-ryger hjem
Specs.
Power Output Signal-to-Noise Ratio
Input Impedance
Input Sensitivity
System Frequency Response Dimensions (H x W x D)
• If using the conventional right and left inputs 1 or
2, make sure that Dolby Pro Logic, Hall, Concert or Stereo mode is selected and its indicator is illuminated in the display. There will be no output if the product is in the 6- channel mode. Also make sure that the appropriate input (1 or 2) is selected as illuminated in the display.
• Check all connections between the ESC230 main unit and each of the speakers.
If one or more of the speakers does not play:
• Check all connections between the ESC230
main unit and each of
the speakers.
• Adjust the balance controls from left to right and front to rear.
15 watts x 6 _at_ 0.1% THD 90 dBA
20k ohms
400 mV
35Hz to 20kHz
If you have very little bass output:
• Make sure the subwoofer is connected properly to the ESC230 main unit.
• Experiment with place- ment of the subwoofer. Remember, place the subwoofer in a corner
to get maximum bass output from the system.
• Make sure Bass Boost
is on.
• Adjust Bass level.
If there is no sound coming from the rear speakers or the volume is very low:
• Check all connections between ESC230 main unit and each of the speakers. • Adjust the front-rear balance controls on the ESC230 main unit.
• Make sure the TV show or movie you are watching is recorded in Dolby Surround. If it is not, try the Concert Hall or Stereo settings on the ESC230 main unit.
When using the 6-channel digital direct inputs, if there is no sound coming from
some channels:
• Make sure that all 6 connectors are securely connected on both the DVD player/outboard processor side and the ESC230 side.
• Make sure that the DVD player/outboard processor’s built-in decoder is correctly configured to provide output to all 5
Brugerprofil
Du skal være logget ind for at se brugerprofiler og sende beskeder.
Log indAnnoncens metadata
Sidst redigeret: 2.1.2025 kl. 20:34 ・ Annonce-ID: 2204346
