Billedgalleri
Alle diske samlet
(1/5)
8 TB DELL EMC MG08SDA800EY (Toshiba) Harddisk (incl. caddy)
Til salg
Fiks færdig
5.000 kr.
Fragt fra 39,99 kr. + Tryg betaling 160 kr.
Tryg handel med Fiks færdig
Fiks færdig er DBA's nye betalings- og fragttjeneste. Efter levering har du 24 timer til at kontrollere varen, før pengene udbetales til sælgeren.
Varebeskrivelse
Stand: Brugt - men i god stand
Sælger 4 styks 8 TB DELL EMC MG08SDA800EY (Toshiba) Harddisk, med WH5D2 caddy til 14th 15th 16th generation Dell server. Alle diske fra 2023.
Alle diske rapporterer "SMART Health Status: OK"
Sælger også en SFF8643 til 4x SAS SFF8482 converter, som jeg har brugt med mit LSI 9300 HBA. Tjek mine andre annoncer.
Dette er enterprise diske med en "Mean time to failure" på 2.000.000 timer, så der er stadig masser af liv i dem.
Her er outputtet af alt SMART data:
root@proxmox:~# smartctl -x /dev/sda
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c485163b5
Serial number: 13P0A2RXFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:39 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 29 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 21
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 21
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 1752508.989 0
write: 0 0 0 0 0 2259.235 0
verify: 0 0 0 0 0 888129.367 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18510:55 [1110655 minutes]
Number of background scans performed: 101, scan progress: 1.59%
Number of background medium scans performed: 101
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 1
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: power on
reason: power on
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485163b6
attached SAS address = 0x500062b20155e4c0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 1
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485163b7
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
root@proxmox:~# smartctl -x /dev/sdb
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c48516345
Serial number: 13P0A2RKFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:40 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 30
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 30
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 1756022.626 0
write: 0 0 0 0 0 2318.747 0
verify: 0 0 0 0 0 889663.847 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18515:00 [1110900 minutes]
Number of background scans performed: 101, scan progress: 12.42%
Number of background medium scans performed: 101
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: loss of dword synchronization
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c48516346
attached SAS address = 0x500062b20155e4c1
attached phy identifier = 1
Invalid DWORD count = 4
Running disparity error count = 4
Loss of DWORD synchronization count = 1
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c48516347
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
root@proxmox:~# smartctl -x /dev/sdc
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c485031f5
Serial number: 13P0A0PKFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:41 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 21
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 21
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 3 3 3 4 1752554.850 0
write: 0 0 0 0 0 2328.114 0
verify: 0 1 1 1 2 888128.463 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18510:55 [1110655 minutes]
Number of background scans performed: 101, scan progress: 1.60%
Number of background medium scans performed: 101
# when lba(hex) [sk,asc,ascq] reassign_status
1 10595:16 00000001b24862f8 [1,18,7] Recovered via rewrite in-place
2 10595:16 00000001b24862f9 [1,18,7] Recovered via rewrite in-place
3 10595:16 00000001b24862fa [1,18,7] Recovered via rewrite in-place
4 10595:16 00000001b24862fb [1,18,7] Recovered via rewrite in-place
5 10595:16 00000001b24862fc [1,18,7] Recovered via rewrite in-place
6 10595:16 00000001b24862fd [1,18,7] Recovered via rewrite in-place
7 10595:16 00000001b24862fe [1,18,7] Recovered via rewrite in-place
8 10595:16 00000001b24862ff [1,18,7] Recovered via rewrite in-place
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: loss of dword synchronization
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485031f6
attached SAS address = 0x500062b20155e4c2
attached phy identifier = 2
Invalid DWORD count = 4
Running disparity error count = 4
Loss of DWORD synchronization count = 1
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485031f7
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
root@proxmox:~# smartctl -x /dev/sdd
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c485030a5
Serial number: 13P0A0NUFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:42 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 21
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 21
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 1751947.563 0
write: 0 0 0 0 0 2246.565 0
verify: 0 0 0 0 0 888130.158 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18510:57 [1110657 minutes]
Number of background scans performed: 101, scan progress: 1.61%
Number of background medium scans performed: 101
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: loss of dword synchronization
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485030a6
attached SAS address = 0x500062b20155e4c3
attached phy identifier = 3
Invalid DWORD count = 4
Running disparity error count = 4
Loss of DWORD synchronization count = 1
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485030a7
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
Bemærk: Knappen til at vise den fulde beskrivelse har kun en visuel effekt.
Brugerprofil
Du skal være logget ind for at se brugerprofiler og sende beskeder.
Log indAnnoncens metadata
Sidst redigeret: 7.3.2026 kl. 12:31 ・ Annonce-ID: 19293017
