easyRESCUE A040 AIS-SART PLB GPS Transmitter - Save your life! S.A.R. WARRANTY! EPIRB
The unit is like new and with full warranty. Battery was tested and have 100% capacity.
AIS S.A.R.T. Current GPS position via AIS-The fastest rescue possible
AIS-SART – position live on chartplotter/PC
easyRescue transmits the position of a liferaft / lifeboat in distress directly to all AIS receivers within range.
The Easy Rescue is an AIS-SART. With a built in GPS it transmits an emergency AIS-SART sentence which triggers an alarm on all AIS enabled chart plotters / PC’s within range, along with the Lat/Long of the liferaft / lifeboat. The GPS is a new generation fast acquiring type and the VHF AIS transmitter repeats the message and position several times per minute. This enables all vessels within range to assist with the rescue if they have an AIS receiver or transponder.
What else do I need?
Apart for an AIS receiver or transceiver connected to a chart plotter / PC, nothing. The Easy Rescue is used on liferaft / lifeboat.
The easyRESCUE-A040-BW-COM is an AIS-SART.
After initialization the easyRESCUE transmits emergency AIS-SART sentence that can be received by all AIS devices (Class A & Class B). The device is also equipped with an integrated, accurate and fast GPS of the latest generation.
STANDART EQUIPMENT AND CHARACTERISTICS
Substantial modification to the equivalent easyRESCUE and easyRESCUE-A with its “auto activation” by means of water contact, easyRESCUE-A040-BW-COM device has got a third activation mode – a magnetic switch with a ripcord. At the upper end of the device a magnet switch is attached to rip cord.
The easyRESCUE-A040-BW-COM does not require any additional equipment to use. To view the position of a person in distress, one to the PC or plotter connected AIS receiver or transponder AIS is necessary only.
There is no registration for the operation of easyRESCUE-A040-BW-COM required!