Billedgalleri
(1/3)
Emotiva XPA 3 Gen 3
Til salg
Fiks færdig
13.000 kr.
Fragt fra 79,99 kr. + Tryg betaling 400 kr.
Tryg handel med Fiks færdig
Fiks færdig er DBA's nye betalings- og fragttjeneste. Efter levering har du 24 timer til at kontrollere varen, før pengene udbetales til sælgeren.
Varebeskrivelse
Stand: Som ny - ingen synlige brugsspor
Har original emballage og certifikat og det hele.
Kraftfuld 3 Kanals forstærker fra Emotiva der kan trække alle højtaler.
Power Specifications
ALL MODELS: Power Output Per Channel 300 watts RMS per channel; 20 Hz - 20 kHz; THD < 0.1%; into 8 Ohms
550 watts RMS per channel; 20 Hz - 20 kHz; THD < 0.2%; into 4 Ohms
800 watts RMS per channel; 20 Hz - 20 kHz; THD < 0.5%; into 2 Ohms
ALL MODELS: FTC Rated Power
2 Channels Driven; 20 Hz - 20 kHz; THD <0.1% 300 watts RMS per channel; THD < 0.1%; into 8 Ohms (120 VAC line)
490 watts RMS per channel; THD < 0.1%; into 4 Ohms (120 VAC line)
XPA Gen3 Power Per Channel: All Channels Driven
THD <0.1% ; into 8 Ohms Two : 300 watts RMS per channel
Three : 275 watts RMS per channel
Four : 260 watts RMS per channel
Five : 250 watts RMS per channel
Six : 225 watts RMS per channel
Seven : 200 watts RMS per channel
Power Bandwidth (at rated power; 8 Ohm load) 20 Hz to 20 kHz (+ / - 0.1 dB)
Broad Band Frequency Response 5 Hz to 80 kHz (+ 0 / - 0.15 dB)
THD + noise < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load) > 117 dB; ref FTC rated power; unbalanced input (A-weighted)
> 91 dB; ref 1 watt; unbalanced input (A-weighted)
Minimum Recommended Load Impedance 4 Ohms; which equals one 4 Ohm load or two paralleled 8 Ohm loads
Damping Factor (8 Ohm load) > 500
Speaker Output Connections Audiophile grade, gold plated, 5-way binding posts
Power Supply High efficiency, audiophile grade, Switch Mode Power Supply (SMPS)
Input Sensitivity (for rated power; 8 Ohm load) 1.5 V
Gain 29 dB
Power Requirements Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected)
Protection The XPA Gen3 is protected against excessive operating temperature
shorted speaker connections, ground faults, and other common fault conditions
Physical Properties
Input Connections Unbalanced (RCA); balanced (XLR); one each per channel
independently selectable
Input Impedance 33 kohms (balanced)
23.5 kohms (unbalanced)
Trigger Trigger Input: 5 - 12 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 120 mA
Front Panel Controls and Indicators Standby; push button (halo ring changes colour to indicate Standby or On)
Status LEDs; one per channel; blue
Status LEDs change to red to indicate a fault condition
Rear Panel Controls AC Power switch; rocker switch (switches AC main power)
Status LEDs switch; disables front panel Status LEDs and dims
Standby button halo
Input selector switches (one per channel); metal toggle switches
select between balanced and unbalanced inputs
Circuit Breaker; press button to reset circuit breaker
Dimensions 17” wide x 8” high x 19” deep (unboxed; including feet)
17” wide x 7” high x 19” deep (unboxed; without feet)
24-1/2” wide x 12” high x 24-3/4” deep (boxed)
Weight 39 lbs (unboxed)
For boxed weight, add 5 lbs
Warranty 5 years
Bemærk: Knappen til at vise den fulde beskrivelse har kun en visuel effekt.
Brugerprofil
Du skal være logget ind for at se brugerprofiler og sende beskeder.
Log indAnnoncens metadata
Sidst redigeret: 18.5.2026 kl. 16:50 ・ Annonce-ID: 21473810
