Billedgalleri
Alle diske samlet
(1/5)
8 TB DELL EMC MG08SDA800EY (Toshiba) Harddisk (incl. caddy)
Til salg
Fiks færdig
4.500 kr.
Fragt fra 39,99 kr. + Tryg betaling 145 kr.
Tryg handel med Fiks færdig
Fiks færdig er DBA's nye betalings- og fragttjeneste. Efter levering har du 24 timer til at kontrollere varen, før pengene udbetales til sælgeren.
Varebeskrivelse
Stand: Brugt - men i god stand
Sælger 4 styks 8 TB DELL EMC MG08SDA800EY (Toshiba) SAS Harddisk, med WH5D2 caddy til 14th 15th 16th generation Dell server. Alle diske fra 2023.
Alle diske rapporterer "SMART Health Status: OK"
Dette er enterprise diske med en "Mean time to failure" på 2.000.000 timer, så der er stadig masser af liv i dem.
Her er outputtet af alt SMART data:
root@proxmox:~# smartctl -x /dev/sda
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c485163b5
Serial number: 13P0A2RXFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:39 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 29 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 21
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 21
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 1752508.989 0
write: 0 0 0 0 0 2259.235 0
verify: 0 0 0 0 0 888129.367 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18510:55 [1110655 minutes]
Number of background scans performed: 101, scan progress: 1.59%
Number of background medium scans performed: 101
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 1
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: power on
reason: power on
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485163b6
attached SAS address = 0x500062b20155e4c0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 1
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485163b7
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
root@proxmox:~# smartctl -x /dev/sdb
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c48516345
Serial number: 13P0A2RKFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:40 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 30
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 30
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 1756022.626 0
write: 0 0 0 0 0 2318.747 0
verify: 0 0 0 0 0 889663.847 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18515:00 [1110900 minutes]
Number of background scans performed: 101, scan progress: 12.42%
Number of background medium scans performed: 101
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: loss of dword synchronization
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c48516346
attached SAS address = 0x500062b20155e4c1
attached phy identifier = 1
Invalid DWORD count = 4
Running disparity error count = 4
Loss of DWORD synchronization count = 1
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c48516347
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
root@proxmox:~# smartctl -x /dev/sdc
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c485031f5
Serial number: 13P0A0PKFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:41 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 21
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 21
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 3 3 3 4 1752554.850 0
write: 0 0 0 0 0 2328.114 0
verify: 0 1 1 1 2 888128.463 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18510:55 [1110655 minutes]
Number of background scans performed: 101, scan progress: 1.60%
Number of background medium scans performed: 101
# when lba(hex) [sk,asc,ascq] reassign_status
1 10595:16 00000001b24862f8 [1,18,7] Recovered via rewrite in-place
2 10595:16 00000001b24862f9 [1,18,7] Recovered via rewrite in-place
3 10595:16 00000001b24862fa [1,18,7] Recovered via rewrite in-place
4 10595:16 00000001b24862fb [1,18,7] Recovered via rewrite in-place
5 10595:16 00000001b24862fc [1,18,7] Recovered via rewrite in-place
6 10595:16 00000001b24862fd [1,18,7] Recovered via rewrite in-place
7 10595:16 00000001b24862fe [1,18,7] Recovered via rewrite in-place
8 10595:16 00000001b24862ff [1,18,7] Recovered via rewrite in-place
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: loss of dword synchronization
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485031f6
attached SAS address = 0x500062b20155e4c2
attached phy identifier = 2
Invalid DWORD count = 4
Running disparity error count = 4
Loss of DWORD synchronization count = 1
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485031f7
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
root@proxmox:~# smartctl -x /dev/sdd
smartctl 7.4 2024-10-15 r5620 [x86_64-linux-6.14.8-2-pve] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: TOSHIBA
Product: MG08SDA800EY
Revision: EL01
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 2 protection
8 bytes of protection information per logical block
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000039c485030a5
Serial number: 13P0A0NUFGAH
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Thu Mar 5 21:13:42 2026 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 30 C
Drive Trip Temperature: 65 C
Manufactured in week 04 of year 2023
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 21
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 21
Elements in grown defect list: 0
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 1751947.563 0
write: 0 0 0 0 0 2246.565 0
verify: 0 0 0 0 0 888130.158 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Reserved(7) Completed 80 4 - [- - -]
# 2 Background short Completed - 2 - [- - -]
Long (extended) Self-test duration: 40922 seconds [11.4 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 18510:57 [1110657 minutes]
Number of background scans performed: 101, scan progress: 1.61%
Number of background medium scans performed: 101
Device does not support General statistics and performance logging
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: loss of dword synchronization
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485030a6
attached SAS address = 0x500062b20155e4c3
attached phy identifier = 3
Invalid DWORD count = 4
Running disparity error count = 4
Loss of DWORD synchronization count = 1
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000039c485030a7
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
Phy event descriptors:
Elasticity buffer overflow count: 0
Received abandon-class OPEN_REJECT count: 0
Transmitted BREAK count: 0
Received BREAK count: 0
Transmitted SSP frame error count: 0
Received SSP frame error count: 0
Bemærk: Knappen til at vise den fulde beskrivelse har kun en visuel effekt.
Brugerprofil
Du skal være logget ind for at se brugerprofiler og sende beskeder.
Log indAnnoncens metadata
Sidst redigeret: 19.4.2026 kl. 12:34 ・ Annonce-ID: 19293017
